Industrial Basic Nickel Carbonate Powder for Nickel Salt and Catalyst Production, 45–48% Ni
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
For a nickel-salt production enquiry, identify the downstream compound before comparing raw materials. This industrial basic nickel carbonate is described as a light green powder with nickel content of 45–48%. Its stated formula is NiCO3*2Ni(OH)2*4H2O.
Specify the nickel compound required downstream
Share the intended product and its constituent acceptance limits with the material enquiry. Request a current elemental nickel analysis on a clearly declared basis. A nickel-content value does not by itself define whole-compound purity or the impurities relevant to the target product.
Check powder characteristics before a conversion trial
Ask for the particle report and physical description of the actual sample. Agree how the sample will be evaluated in the intended process before interpreting any result. No reaction temperature, reagent quantity, conversion yield or finished-product quality is established by the industrial-grade designation.
Review the conditions behind pH and density
The reported material pH is 7.0–9.0, and density is approximately 3.5–4.0 g/cm³. Request the pH preparation procedure, test concentration and density method. Keep these measurements separate from the operating conditions chosen for a nickel-salt or catalyst process.
- Define the downstream composition and impurity criteria.
- Link current analysis and particle information to the tested powder.
- Review actual-process results before selecting the material.
Catalyst-production requests should also identify the intended process and its own acceptance measures. Obtain the applicable technical and handling documents, and keep the trial record associated with the sample that was evaluated.
