Industrial Cobalt-Oxide Black Powder, TY-Cobalt Oxide, for Electronic-Material and CoO Phase Assessment
-
ColorBlackPhysical formPowder
-
CAS No.1307-96-6Purity99%
-
AppearanceBlack PowderApplicationLithium Battery Materials, Ceramic Pigments, Glass
-
ClassificationCobalt OxideEINECS No.215-154-6
-
Grade StandardIndustrial GradeMolecular FormulaCoO
-
Other NamesCobalt Monoxide / Cobalt TetroxideOxide TypeMetal Oxides
-
Molecular Weight74.93SolubilityInsoluble in Water
-
Density6.44 g/cm³MOQ1 MT
-
Packaging25kg Bag, 500kg Bag, 1000kg Jumbo BagSupply Ability500 MT per Month
-
SampleAvailableCertificateISO, COA, MSDS
An electronic-material enquiry needs the actual cobalt-oxide phase to be identified before a grade can be accepted. TY-Cobalt Oxide is an offered model of industrial black cobalt-oxide powder, providing a limited material-family starting point for a documented technical comparison.
Confirm the oxide phase required by the project
State whether the project specifically requires cobalt monoxide, CoO, and request analytical identification of the actual offered powder. A model name and black appearance identify the enquiry material, while phase-specific acceptance needs an appropriate current report.
Request composition on the confirmed phase basis
Ask for the actual assay basis, individual impurity results and relevant particle measurements after the oxide identity is established. Any required physical-property report should identify the material tested and its method, so the comparison uses evidence for the offered grade rather than an assumed oxide phase.
- Identity evidence
- Actual phase identification linked to the offered model.
- Grade evidence
- Phase-specific composition and the required impurity and powder limits.
Define the electronic-material qualification separately
Describe the intended process and the measurements that determine material acceptance. Electronic materials, lithium-battery materials, ceramic pigments and glass are enquiry directions; they do not establish an electronic-grade, electrochemical or finished-process result.
Samples are available, with terms, current safety documents and any applicable certification scope to confirm. Request the phase report with the sample brief before drawing a CoO-specific conclusion, and connect the accepted material measurements to the actual qualification trial.
