Industrial Sodium Acetate Anhydrous TY-Sodium Acetate, 99% Min, for Water-Treatment Enquiries
-
ColorWhitePhysical formCrystalline
-
CAS No.127-09-3Purity99%
-
AppearanceWhite crystalApplicationWater Treatment, Food Additives, Textile Dyeing, P
-
Intended useIndustrial UseEINECS No.204-823-8
-
Molecular FormulaCH3COONaOther NamesAnhydrous Sodium Acetate
-
TypeOtherProduct NameSodium Acetate Anhydrous
-
Molecular Weight82.03Melting Point324°C
-
Density1.53 g/cm³SolubilityEasily Soluble in Water
-
MOQ1 MTPackaging25kg Bag, 500kg Bag, 1000kg Jumbo Bag
-
Supply Ability3000 MT per MonthSampleAvailable
-
CertificateCOA, MSDS, TDS, ISO
A water-treatment enquiry should state the objective and the process criteria used to judge a raw material. TY-Sodium Acetate is an industrial-use sodium acetate anhydrous with a 99% minimum-purity designation. Its formula is CH3COONa, and its appearance is described as white crystals.
Define what the treatment project needs to demonstrate
Identify the actual water system and the intended process before requesting a sample assessment. Agree the constituent limits and the measurements that determine acceptance. A water-treatment application label does not establish a treatment mechanism, removal result, addition rate or operating pH.
Check current anhydrous acetate analysis
Request sample-linked identity, purity and relevant impurity reports. Confirm the analytical basis and any moisture information needed to compare the anhydrous material consistently. Keep the minimum-purity designation separate from a conclusion about the actual treatment process.
Review physical measurements with their methods
- Reported melting point
- The stated value is 324°C; ask for the test basis rather than treating it as an operating condition.
- Reported density
- The stated value is 1.53 g/cm³; confirm the measurement method and sample description.
- Water solubility
- The crystals are reported as easily soluble in water, without a stated dissolution time.
Review current technical and handling documents alongside the actual-process assessment before selection. Textile-dyeing enquiries require separate acceptance criteria. Retain each analytical report and trial observation with the identity of the sample that was evaluated.
