Industrial Sulfamic Acid Crystal Powder, 99.5%, for Electroplating and Surface-Finishing Evaluation
-
ColorWhitePhysical formCrystalline , Powder
-
CAS No.5329-14-6Purity99.5%
-
AppearanceWhite Crystal PowderApplicationDescaling, Water Treatment, Metal Cleaning, Electr
-
ClassificationSulfuric Acid, Organic AcidEINECS No.226-218-8
-
Grade StandardIndustrial GradeMolecular FormulaNH2SO3H
-
Other NamesAmidosulfonic Acid, Sulphamic AcidProduct NameSulfamic Acid
-
Molecular Weight97.09SolubilitySoluble in Water
-
Density2.13 g/cm³MOQ1 MT
-
Packaging25kg Bag, 500kg Bag, 1000kg Jumbo BagSupply Ability5000 MT per Month
-
SampleAvailableCertificateCOA, MSDS, TDS, ISO
Electroplating and surface-finishing enquiries need an analytical brief that reflects the actual process. This industrial sulfamic acid is described as white crystal powder with stated purity of 99.5%. Its formula is NH2SO3H, and reported density is 2.13 g/cm³.
Connect the sulfamic acid sample to the finishing line
Describe the intended process and substrate when requesting a material assessment. Agree the constituent limits and the observations used to judge acceptance before the trial. A general finishing application label does not establish a bath recipe, deposition result or compatibility with every surface.
Review current purity and constituent analysis
Ask for sample-linked identity and analysis documents, including the reporting basis for purity and any impurity measurements required by the project. Confirm that the reports refer to the actual crystal powder being evaluated. The stated purity does not replace the process-specific constituent requirements.
Keep physical data separate from operating conditions
- Water solubility
- The material is reported as soluble in water; no dissolution time or preparation concentration is specified.
- Density
- Request the test method behind the stated density before using it for material comparison.
- Process assessment
- Review the actual substrate and finishing results under the agreed trial procedure.
Descaling, water-treatment and metal-cleaning requests need their own acceptance criteria. Obtain current technical and handling documents for the intended use, and retain the sample identity, analytical records and trial observations together when reviewing the final material selection.
