Sodium Acetate Anhydrous 99% Min Industrial Grade Powder, CAS 127-09-3, for Assay-Based Selection
-
ColorWhitePhysical formCrystalline , Powder
-
CAS No.127-09-3Purity99%
-
AppearanceWhite crystalApplicationWater Treatment, Food Additives, Textile Dyeing, P
-
Intended useIndustrial UseEINECS No.204-823-8
-
Molecular FormulaCH3COONaOther NamesAnhydrous Sodium Acetate
-
TypeOtherProduct NameSodium Acetate Anhydrous
-
Molecular Weight82.03Melting Point324°C
-
Density1.53 g/cm³SolubilityEasily Soluble in Water
-
MOQ1 MTPackaging25kg Bag, 500kg Bag, 1000kg Jumbo Bag
-
Supply Ability3000 MT per MonthSampleAvailable
-
CertificateCOA, MSDS, TDS, ISO
A 99% minimum assay is a useful starting requirement for an industrial acetate purchase, but a complete grade comparison also needs the remaining acceptance criteria. TY-Sodium Acetate is anhydrous CH3COONa, described as white crystals with easy water solubility.
Read the minimum assay alongside the full analysis
The stated 99% minimum should be checked against a current report for the offered material. Ask separately for moisture and individual impurity results, because a single purity figure does not identify every constituent relevant to the purchasing specification.
Clarify how the physical descriptors were measured
The reported density is 1.53g/cm³ and the stated melting point is 324°C. Request the associated test methods and sample conditions; these values describe the material and do not provide an operating temperature or manufacturing procedure.
- State the required assay and individual acceptance limits.
- Identify the actual TY-Sodium Acetate model in the document request.
- Relate the sample results to the intended industrial application.
Resolve process questions beyond the assay figure
Water treatment and textile dyeing are listed application directions. Each needs an actual process brief and relevant trial evidence before compatibility or performance can be accepted; easy water solubility alone does not settle the required use conditions.
Samples are available, with terms and current safety and technical documents to confirm. Request the applicable ISO scope where relevant, and keep the agreed grade limits with the sample assessment. Industrial purity does not establish food-grade suitability or an approval for a particular finished product.
