XM-PB06 Precipitated Barium Sulfate for Powder-Coating Trials, 98–99% Purity with 0.5–0.7 Micron D50
-
Particle-size designationD50 specifiedColorWhite
-
Physical formPowder
-
CAS No.7727-43-7Purity98%-99%
-
AppearanceWhite PowderApplicationPlastic,Rubber,Coating,Sealants
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4Other NamesPrecipitated Barium Sulphate
-
TypeBarium SulfateModel NumberXM-PB06
-
D50(μm)0.5-0.7D97(μm)1.8-2.5
-
Whiteness98-99%pH7-8
-
Oil Absorption(G/100g)13-15Package25kg/Bag
-
CertificationISO9001Hs code28332700
-
Package AppearancecustomizedSampleFreely
XM-PB06 is an industrial precipitated barium sulfate white powder for formulation evaluation, with powder coating as the focus of this enquiry. Its 98–99% purity and paired particle-size ranges provide a material specification to review before judging the complete coating's result.
Frame the powder-coating acceptance test
Identify the actual binder, processing route and appearance criteria for the proposed XM-PB06 trial. The sulfate's coating-use direction does not establish a high-gloss finish, dispersion result or production advantage without application-specific evidence.
Compare distribution and optical requirements separately
For XM-PB06, D50 is 0.5–0.7 microns and D97 is 1.8–2.5 microns, while whiteness is 98–99%. Agree the particle-distribution and whiteness measurement methods separately, and set the assay requirement independently rather than treating matching percentages as the same property.
- Material identity
- The powder is precipitated BaSO4, identified by model XM-PB06 and CAS 7727-43-7.
- Supporting physical check
- The pH range of 7–8 needs an agreed preparation and test method.
- Other formulation directions
- Plastics, rubber and sealants are identified uses requiring their own matrix qualification.
Request grade evidence before coating approval
Current analysis, safety documents and a representative powder-coating trial should support the XM-PB06 decision. Sampling and package-appearance customisation are identified, but their arrangements and any applicable certification requirement need confirmation for the specific enquiry; origin or general advantage wording is not a substitute for a qualified material result.
Use the XM-PB06 specification to connect the assay, distribution and whiteness criteria to one defined powder-coating trial, with the completed coating tested against the actual project requirements.
