FT-AQ894, FT-AS594 and FT-AQ596 White Talc Powder for Ink, Ribbon and Plastic Modification Enquiries
-
ColorWhitePhysical formPowder
-
Product nameUltra Fine Asbestos-Free Talc PowderColorWhite
-
GradeIndustrial GardeWhiteness92%-96%
FT-AQ894, FT-AS594 and FT-AQ596 are three selectable white talc-powder models for ink, ribbon and plastic-modification enquiries. The industrial designation is accompanied by a stated whiteness range of 92%-96%, with the individual grade and measurement basis to be confirmed.
Compare the models on the same test basis
Request a separate specification for each model before assigning a colour or fineness value to it. The shared whiteness range does not explain which measurement belongs to each offered grade. Ask for the optical method and a particle-distribution report so the comparison uses actual measurements.
- FT-AQ894 and FT-AS594
- Identify each sample separately and request its own technical sheet.
- FT-AQ596
- Keep the full model identifier attached to the offered sample and reports.
Obtain the relevant screening evidence
Request applicable asbestos-screening documentation matched to the proposed material, together with its test method. A descriptive label alone does not verify an asbestos-free status. Review the safety information and mineral analysis alongside the grade documents rather than inferring qualification from an ultrafine designation.
Evaluate the intended ink or polymer system
Describe the ink, ribbon or plastic formulation and the processing or appearance criteria that matter to the project. Compare representative samples under agreed conditions before accepting a performance benefit. Keep the model, colour basis, particle report and trial result together so the selected grade is supported by its own evidence and a repeat enquiry remains unambiguous.
