Industrial Basic Nickel Carbonate Powder, 45% Ni Minimum Designation, for Ceramic Pigment and Catalyst Trials
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
Nickel content and whole-compound purity are different questions in a basic nickel carbonate enquiry. This industrial material is a light green powder with stated nickel content of 45–48% and a 45% minimum nickel designation. Ceramic pigments and catalysts are identified evaluation contexts.
Review the elemental nickel assay on its declared basis
Request current analysis for the sample and confirm the basis used to report nickel. Define the other constituent limits required by the intended process. The nickel percentage does not by itself describe the purity of the entire basic carbonate compound.
Compare the basic carbonate physical and pH reports
The stated formula is NiCO3*2Ni(OH)2*4H2O, reported pH is 7.0–9.0 and density is approximately 3.5–4.0 g/cm³. Obtain the pH preparation and density methods before comparing materials. Request particle data where the proposed process needs it.
Define the pigment or catalyst result required
Describe the actual formulation and the process conditions used for the evaluation. Select the finished-material tests before assessing the sample. Chemical identity and nickel content do not establish a particular colour result, catalyst activity or universal compatibility.
Qualify any battery or plating context separately
Battery-material and electroplating enquiries need their own composition and process requirements. Request the relevant documents and controlled actual-system results rather than inferring performance from an application name. Keep the current analysis with the exact powder tested, review applicable qualification evidence and confirm the supplied storage instructions before acceptance.
