Industrial Basic Nickel Carbonate Powder for Battery-Material Enquiries, 45–48% Nickel Content
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
The battery component and chemistry should determine the analytical brief for a nickel raw-material enquiry. This light green industrial basic nickel carbonate powder carries a stated 45–48% elemental nickel range. Reported physical information includes material pH of 7.0–9.0 and approximate density of 3.5–4.0 g/cm³.
Define the battery-component material requirements
State the actual process and the constituent limits the project must meet. Request relevant particle and current composition reports for the sample. An industrial use label does not establish battery-grade qualification, capacity, cycle performance or compatibility with a specific system.
Review the basic carbonate identity and nickel basis
The stated formula is NiCO3*2Ni(OH)2*4H2O. Obtain appropriate compound-specific identity documents alongside current nickel analysis. Confirm the reporting basis, since elemental nickel content does not establish the purity of the entire basic carbonate compound.
Keep physical measurements connected to their methods
Ask for the material-pH preparation procedure and the density test basis before comparing grades. Preserve the approximate nature of the stated density. These material values do not specify the conditions for a battery process or predict its finished-material result.
- Review current identity and composition evidence for the actual sample.
- Agree constituent, particle and process acceptance criteria.
- Assess controlled component-specific results and applicable qualification documents.
Catalyst and electroplating enquiries require their own evidence. Keep the reports linked to the powder actually tested and confirm the supplied storage instructions before making a final selection.
