Industrial Basic Nickel Carbonate Powder for Electroplating and Chemical-Synthesis Trials, 45–48% Nickel
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
A nickel-content consistency requirement should be defined through measurable acceptance criteria. This industrial basic nickel carbonate is a light green powder with stated nickel content of 45–48%. Electroplating and chemical synthesis are identified evaluation contexts.
Define what consistent nickel content means for the project
Request current analysis and agree the acceptable range and reporting basis. If consistency across supplies matters, ask for relevant comparable reports and a common evaluation method. A stability description does not establish variation limits or replace measured results.
Confirm the basic carbonate and its physical measurements
The stated formula is NiCO3*2Ni(OH)2*4H2O, material pH is 7.0–9.0 and density is approximately 3.5–4.0 g/cm³. Obtain the pH preparation and density methods for the sample. Preserve the approximate density qualifier when comparing grades.
Set the plating or synthesis acceptance tests
Describe the intended process and the constituent limits it requires. Request particle information where relevant and evaluate the actual sample under controlled conditions. Elemental nickel content does not establish whole-compound purity or guarantee a finished-process result.
- What belongs with the sample?
- Current nickel and constituent analysis, relevant physical reports and compound-specific technical documents.
- What needs its own assessment?
- Any catalyst or battery-material application and its specialised performance requirements.
Keep the technical evidence linked to the powder actually tested. Review the process outcome and applicable qualification documents before acceptance, and confirm the supplied storage instructions as part of the material review.
