Industrial Basic Nickel Carbonate Powder, Ni 45–48%, for Specialty-Chemical Manufacturing Assessment
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
A specialty-chemical manufacturing enquiry should identify the actual project and the limits that define an acceptable material. This industrial basic nickel carbonate is a light-green powder with stated nickel content of 45–48% for a documented grade and process comparison.
Name the chemical project and accepted material limits
Describe the intended use and the composition, impurities and powder properties it requires. A specialty-chemical direction supports an enquiry, while an approved specialty grade or successful process result needs relevant evidence for the actual offered material.
Clarify the nickel analysis before comparing grades
Request current composition and the basis used to report the nickel-content result. A high-nickel description does not supply compound purity or every required impurity limit, so the technical comparison should identify the individual measurements accepted by the project.
- Chemical questions
- Actual composition, nickel-analysis basis and required impurity limits.
- Powder questions
- Relevant particle measurements and method-defined physical properties.
Connect physical reports with the process qualification
The stated approximate density is 3.5–4.0g/cm³ and product pH is 7.0–9.0, with methods and pH concentration to confirm. The powder is described as insoluble in water; these material properties do not replace an actual process trial or provide manufacturing instructions.
Samples are available, with current terms, safety documents and storage and shelf-life conditions to agree. Battery materials and catalysts are also enquiry directions with their own acceptance requirements. Include the actual chemical project and requested grade reports so the comparison rests on evidence rather than a general quality descriptor or an assumed performance benefit.
