Industrial Basic Nickel Carbonate Powder, Nickel 45–48%, for Ceramic-Pigment and Catalyst-Production Assessment
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
A catalyst-production material brief should identify the chemical limits and accepted measurements before a nickel carbonate grade is compared. This industrial basic nickel carbonate is a light-green powder with stated nickel content of 45–48% for catalyst and ceramic-pigment assessment.
Write the catalyst material acceptance criteria
Request current composition and the basis of the nickel analysis for the actual offered grade. Define the required impurities and powder measurements, because a nickel-content range does not establish compound purity, catalyst activity or a result in the intended process.
Identify the ceramic-pigment requirements independently
Describe the actual pigment system and the measurements that determine its acceptance. A ceramic-pigment direction supports a material enquiry, while the required colour or other finished-system response needs relevant qualification rather than transfer from a catalyst application.
- Catalyst questions
- Actual composition, required chemical limits and accepted process measurements.
- Pigment questions
- The intended system, powder requirements and relevant output assessment.
Check the physical reports before the sample comparison
The stated approximate density is 3.5–4.0g/cm³, product pH is 7.0–9.0 and the powder is described as water-insoluble. Obtain the density and pH methods, including pH test concentration, so these values remain material measurements rather than assumed operating conditions.
Samples are available, with current terms, safety documents and storage and shelf-life conditions to confirm. Battery materials are also an enquiry direction with separate qualification needs. Include the analysis basis and actual process brief so the offered powder is compared against defined evidence without an assumed activity, purity or finished-colour guarantee.
