XM-PB02 Precipitated Barium Sulfate Powder for Paint, 98–99% Purity

Share
Product description
  • Color
    White
    Physical form
    Powder
  • CAS No.
    7727-43-7
    Purity
    98%-99%
  • Appearance
    White Powder
    Application
    Plastic,Rubber,Coating,Sealants
  • Classification
    Sulphate
    Grade Standard
    Industrial Grade
  • Molecular Formula
    BaSO4
    Other Names
    Precipitated Barium Sulphate
  • Type
    Barium Sulfate
    Model Number
    XM-PB02
  • D50(μm)
    0.5-0.7
    D97(μm)
    1.8-2.5
  • Whiteness
    98-99%
    pH
    7-8
  • Oil Absorption(G/100g)
    13-15
    Package
    25kg/Bag
  • Certification
    ISO9001
    Hs code
    28332700
  • Package Appearance
    customized
    Sample
    Freely

A paint binder gives the XM-PB02 mineral comparison its practical context. This industrial precipitated barium sulfate white powder has 98–99% stated purity, with grade measurements that let a formulator ask more precise questions before deciding whether a paint trial should proceed.

Connect XM-PB02 with the intended paint binder

Define the paint formulation and the finished-film criteria that matter to the project. The XM-PB02 model identifies a candidate, while the actual binder trial must establish the relevant finish and processing result. Do not assume a gloss improvement or a fixed replacement ratio from the precipitated mineral name.

Keep the measured fine-particle profile intact

XM-PB02 has a stated D50 of 0.5–0.7 μm and D97 of 1.8–2.5 μm. Compare those distinct measurements using agreed methods rather than replacing them with an unqualified fine-powder label. Request the complete grade specification so the test sample and the technical comparison refer to the same offered material.

Set the white-paint comparison on a common basis

The stated whiteness is 98–99%, with pH 7–8 also available as a screening value. Confirm the whiteness method before judging the powder against another paint mineral. A powder measurement should remain separate from the colour or appearance achieved by the finished formulation.

For XM-PB02, a useful paint enquiry combines the binder requirements, the measured mineral profile and the agreed acceptance test. Plastics, rubber and sealants are additional stated directions, but each needs its own formulation evidence instead of inheriting the paint conclusion.