XM-PB06 Precipitated Barium Sulfate Additive for Powder Coatings — 98–99% Industrial Powder
-
ColorWhitePhysical formPowder
-
CAS No.7727-43-7Purity98%-99%
-
AppearanceWhite PowderApplicationPlastic,Rubber,Coating,Sealants
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4Other NamesPrecipitated Barium Sulphate
-
TypeBarium SulfateModel NumberXM-PB06
-
D50(μm)0.5-0.7D97(μm)1.8-2.5
-
Whiteness98-99%pH7-8
-
Oil Absorption(G/100g)13-15Package25kg/Bag
-
CertificationISO9001Hs code28332700
-
Package AppearancecustomizedSampleFreely
A powder-coating enquiry can begin with three clear references: the additive grade, its powder specification and the intended finish. XM-PB06 is an industrial precipitated barium sulfate white powder with 98–99% purity for that application-specific material comparison.
Connect XM-PB06 to the coating binder
Identify the binder and the finished-coating criteria that the additive trial must meet. The powder-coating direction supports evaluation, but it does not establish gloss, flow or durability in a formulation that has not been tested.
Read the fine-powder specification completely
The stated XM-PB06 D50 is 0.5–0.7μm and D97 is 1.8–2.5μm, with 98–99% whiteness. Ask for the measurement methods and relevant treatment information before deciding how those raw-material values should be compared with the current additive.
- Incoming additive
- Review the current analysis and complete particle specification for XM-PB06.
- Finished coating
- Use the binder-specific trial and the finish tests that decide acceptance.
Keep application evidence attached to its result
The pH range of 7–8 is another powder comparison point, rather than proof of a coating outcome. Plastic, rubber and sealant projects also require their own acceptance evidence, so a successful powder-coating trial should not be treated as universal approval.
Ask about a sample and customized package appearance with the XM-PB06 technical request. The useful additive decision is the one supported by the confirmed powder documents and the finished-coating measurements relevant to the project.
