XM-SM60 Sulfate Transparent Filler Masterbatch with LDPE/LLDPE Carrier for Film Blowing and Injection Moulding Evaluation
-
ColorTransparentPhysical formMasterbatch , Granular
-
CAS No.7757-82-6Purity80%
-
Appearancetransparent granuleApplicationplastic, Film Blowing
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4TypeSodium Sulphate
-
Model NumberXM-SM60Hs code28331900
-
CertificationISO9001Usage10%-50%
-
Packing25KG/BagApplication 1Injection Molding
-
CarrierLDPE+ LLDPEFeatureHigh Transparent
-
MFI8-12g/10minSampleAvailiable
XM-SM60 is a transparent filler masterbatch presented as industrial granules with an LDPE and LLDPE carrier. For film blowing or injection moulding, the first selection step is to confirm the complete composition and match the carrier to the resin and process being evaluated.
Establish the sulfate composition
The XM-SM60 product identity needs a current composition specification before a buyer selects it by a particular sulfate name. Ask for the actual mineral constituent, its content basis and the product-specific safety document; neither a model code nor a broad purity percentage defines the complete masterbatch formulation.
Compare carrier and flow under defined conditions
LDPE/LLDPE is the stated carrier system for XM-SM60 and should be assessed alongside the intended base resin. A melt-flow comparison also requires the test temperature and load, so request the relevant conditions rather than treating a flow number as sufficient proof of compatibility with a blown-film or moulding process.
- Specify the base resin and whether XM-SM60 will be tested in film blowing or injection moulding.
- Confirm the sulfate identity, composition basis and applicable material documentation.
- Set the process and finished-article acceptance criteria before selecting the trial addition level.
Measure optical and environmental outcomes
The transparent-granule form does not establish the light transmission or haze of a finished plastic article. Evaluate XM-SM60 in the actual resin and geometry, and require appropriate evidence for any environmental claim instead of assuming that a transparent filler is environmentally preferable.
An XM-SM60 qualification should link a verified composition to its LDPE/LLDPE carrier and the chosen plastic process, with optical results established on the finished film or moulded part.
