XM-T80-9 Transparent Filler Masterbatch with LDPE/LLDPE Carrier for Film and Injection-Moulded Plastic Evaluation
-
ColorTransparentPhysical formMasterbatch , Granular
-
CAS No.7757-82-6Purity80%
-
Appearancetransparent granuleApplicationplastic, Film Blowing
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4TypeBarium Sulfate
-
Model NumberXM-T80-9Hs code28331900
-
CertificationISO9001Usage10%-50%
-
Packing25KG/BagApplication 1Injection Molding
-
CarrierLDPE+ LLDPEFeatureHigh Transparent
-
MFI8-12g/10minSampleAvailiable
For a filler-masterbatch project with an optical appearance requirement, XM-T80-9 offers a named industrial grade to evaluate. The supplied material is described as transparent granules with an LDPE/LLDPE carrier, with film blowing and injection moulding as the stated process directions.
Define what colour consistency means for the project
A colour-consistency requirement for XM-T80-9 should specify the finished article, measurement method and permitted variation. The product name's quality language does not provide a quantified batch-colour result, so request representative evidence rather than assuming that a white-barium description guarantees a consistent finished-plastic appearance.
Confirm the granule composition before comparison
The LDPE/LLDPE carrier is a useful starting point for an XM-T80-9 enquiry, but the complete mineral/carrier composition still needs a product-specific specification. Establish the actual chemical identity and the basis of any content percentage before interpreting a broad purity figure as filler loading.
- Process-fit evidence
- Request the temperature and load used for the XM-T80-9 melt-flow measurement.
- Film evaluation
- Set the resin, film thickness and required optical criteria for the intended blowing trial.
- Moulded-part evaluation
- Identify the resin and article geometry before judging the masterbatch's processing and appearance results.
Approve the finished article rather than the label
Transparent-granule appearance does not establish light transmission, haze or colour variation in every plastic formulation. Use an agreed trial addition level and representative process conditions to test XM-T80-9 against the actual project, with applicable safety and composition documents reviewed before approval.
Specify XM-T80-9 around measurable composition, flow and final-article appearance criteria so that the masterbatch enquiry can be evaluated without relying on an unmeasured colour-consistency promise.
