Barium Carbonate BaCO3 White Powder, CAS 513-77-9 and 99% Minimum Purity for Glass and Ceramic Trials
-
Particle-size designationMesh designationColorWhite
-
Physical formPowder
-
CAS No.513-77-9Purity99.0%
-
AppearanceWhite PowderApplicationCeramics, Glass, Ferrite, Electronic Industry, Ceramics, Glass, Ferrite, Electronic Industry, Enamel
-
ClassificationCarbonateEINECS No.208-167-3
-
Grade StandardIndustrial GradeMolecular FormulaBaCO3
-
Other NamesCarbonic Acid Barium SaltTypeBarium Carbonate
-
Product NameBarium CarbonateDensity4.43 g/cm³
-
Melting Point811°C (Decomposes)SolubilityInsoluble in Water
-
Particle Size325 MeshStorageCool, Dry and Well-Ventilated Place
-
Shelf Life24 MonthsPackaging25kg PP Woven Bag / 1000kg Jumbo Bag
-
SampleAvailable
This industrial barium carbonate is a white BaCO3 powder with a minimum purity designation of 99% and a 325 mesh size criterion. For glass or ceramic development, confirm the actual offered grade and the process requirements before assessing the carbonate in a material trial.
Connect the carbonate analysis to the actual batch
Request a current product-specific analysis and relevant impurity limits, with chemical identity reconciled against the supplied CAS 513-77-9 and matching safety documents. A COA or MSDS description should lead to the actual applicable documents rather than an assumption that the required evidence is already established.
Define the 325 mesh powder comparison
The mesh criterion needs an agreed basis and the measured distribution required by the intended glass or ceramic process. Density is 4.43 g/cm3 and the water-solubility description is insoluble, each to be assessed on the relevant test basis rather than transferred from a different barium compound.
- Glass project
- Identify the proposed carbonate role and the actual batch and process acceptance criteria.
- Ceramic project
- Define the material specification and representative formulation or firing assessment needed for approval.
- Thermal requirement
- Request a confirmed thermal-event definition and test method rather than treating a mixed thermal description as a process operating condition.
Keep other industrial applications separately qualified
Ferrite, electronics and enamel are additional identified directions, each requiring its own material role and evidence. Use current product-specific technical and safety information, including the stated cool, dry and well-ventilated storage direction, with the actual grade and shelf-life basis confirmed.
For this BaCO3 enquiry, combine the confirmed assay and powder specification with the relevant glass or ceramic tests. The actual process results and applicable product documents should establish whether the proposed carbonate meets the project.
