Industrial Basic Nickel Carbonate Powder for Electroplating and Catalyst Trials, 45–48% Nickel Content
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
For electroplating and catalyst trials, compare the incoming nickel material against the requirements of the actual process. The industrial basic nickel carbonate offered for enquiry has a light green powder appearance and stated elemental nickel content of 45–48%. Material measurements are reported as pH 7.0–9.0 and an approximate density of 3.5–4.0 g/cm³.
Specify the plating or catalyst process first
Describe the intended system and the constituent limits it requires. Agree the processing and finished-material tests that will determine acceptance. A broad application name does not establish a plating result, catalyst activity or compatibility with the proposed formulation.
Review nickel content separately from compound purity
Request current analysis and the basis used to report elemental nickel. The stated formula is NiCO3*2Ni(OH)2*4H2O. A nickel percentage does not by itself define the purity of the whole basic carbonate compound or every remaining constituent.
Compare pH and density using the actual methods
Obtain the material-pH preparation procedure and the density measurement basis. Preserve the approximate nature of the stated density when comparing reports. Request particle information where needed, and avoid treating a material-pH result as a plating-bath operating instruction.
- What should accompany a process trial?
- Current sample-linked nickel and constituent analysis, relevant physical reports and applicable technical documents.
- What needs separate qualification?
- Any battery-material enquiry or other specialised use.
Evaluate the exact sample under controlled project conditions and review the resulting evidence before acceptance. Keep the reports connected to the powder tested and confirm the supplied storage instructions with the technical documentation.
