Industrial Basic Nickel Carbonate Powder for Nickel-Oxide Manufacturing Evaluation, 45–48% Nickel
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
Nickel-oxide manufacturing assessment starts by setting separate requirements for the carbonate feed material and the finished oxide. The stated nickel content of this industrial basic nickel carbonate is 45–48%, and its appearance is light green powder. The accompanying material values are pH 7.0–9.0 and density of approximately 3.5–4.0 g/cm³.
Define the incoming carbonate requirements
Request current nickel and constituent analysis for the sample and confirm the reporting basis. The stated formula is NiCO3*2Ni(OH)2*4H2O. Elemental nickel content does not by itself establish whole-compound purity or every impurity limit needed by the manufacturing project.
Specify the finished oxide result to be assessed
Describe the intended process and the finished-material criteria that the trial must demonstrate. Request appropriate process and product reports rather than assuming a conversion outcome from the application name. The material description does not establish operating conditions, yield or a particular final oxide phase.
Review physical evidence for the actual sample
Obtain particle information where relevant and confirm the pH preparation and density measurement methods. Preserve the approximate density qualifier when comparing candidate materials. These powder values do not replace actual manufacturing evidence for the intended system.
- What supports a raw-material selection?
- Current composition and physical reports matched to the controlled process trial.
- Which uses need separate qualification?
- Battery-material, catalyst and electroplating applications and their respective requirements.
Keep all reports linked to the powder actually tested. Review the finished-material results, applicable technical documents and supplied storage instructions before deciding whether the sample meets the manufacturing brief.
