XM-A100 Titanium Dioxide for Paint and Coating Trials, 96–98.5% TiO2 Industrial White Powder
-
ColorWhitePhysical formPowder
-
CAS No.13462-67-7Purity96%~98.5%
-
Model NumberXM-A100Appearancewhite Powder
-
Applicationplastic coating paint printing inkClassificationTitanium Dioxide
-
Grade StandardIndustrial GradeMolecular FormulaTiO2
-
Other Namestio2CertificationISO9001
-
HS code3206111000Package25kg/bag
-
PH Value6.5-8.5TiO2 Content96~98.5%
-
Oil Absorption21~26Residue on sieve 45 μm %0.03~0.05
-
Matter volatile at 105°C %0.3~0.5Tinting strength %95~109
-
SampleFreely Provided
XM-A100 is a titanium dioxide white powder for industrial paint and coating evaluation, with a TiO2 content of 96–98.5%. Plastics and printing ink are also identified application directions, requiring their own grade and formulation acceptance criteria.
Define the paint or coating project
For XM-A100, state the binder and the optical, dispersion and application tests that will decide whether a pigment change is acceptable. General top-quality or enhancement wording does not establish the finished-film result, so compare the offered grade against a defined project specification.
Check sieve residue and volatile matter separately
The XM-A100 residue range is 0.03–0.05% on a 45 micron sieve, while matter volatile at 105°C is 0.3–0.5%. Each value has its own condition and measurement purpose; confirm the test methods and batch limits rather than treating either as direct evidence of opacity or weathering performance.
- Relative tinting strength
- The 95–109% range needs a reference and method before comparison with another pigment.
- pH criterion
- Confirm the preparation used for the stated 6.5–8.5 pH range.
- Grade identity
- Request the actual XM-A100 crystal form, surface treatment and chemical-identity documentation.
Qualify the offered pigment in its matrix
Use a current product-specific analysis and safety document together with a representative paint or coating trial. An ink or plastic use requires evaluation in its intended binder or resin, and any certification requirement needs the applicable current evidence rather than an assumed approval from the product name.
For this XM-A100 enquiry, combine the real TiO2 content and defined physical-test criteria with a clear coating target, allowing the formulation trial to establish whether the grade meets the intended result.
