Barium Carbonate BaCO3 White Powder for Ceramic Body, Glass and Enamel Trials, 99% Purity and 325 Mesh
-
Particle-size designationMesh designationColorWhite
-
Physical formPowder
-
CAS No.513-77-9Purity99.0%
-
AppearanceWhite PowderApplicationCeramics, Glass, Ferrite, Electronic Industry, Ceramics, Glass, Ferrite, Electronic Industry, Enamel
-
ClassificationCarbonateEINECS No.208-167-3
-
Grade StandardIndustrial GradeMolecular FormulaBaCO3
-
Other NamesCarbonic Acid Barium SaltTypeBarium Carbonate
-
Product NameBarium CarbonateDensity4.43 g/cm³
-
Melting Point811°C (Decomposes)SolubilityInsoluble in Water
-
Particle Size325 MeshStorageCool, Dry and Well-Ventilated Place
-
Shelf Life24 MonthsPackaging25kg PP Woven Bag / 1000kg Jumbo Bag
-
SampleAvailable
For a ceramic-body or enamel material enquiry, this industrial barium carbonate provides a white BaCO3 powder description with 99.0% purity and a 325 mesh criterion. Confirm the actual offered specification and relevant process tests before approving the material comparison.
Set the ceramic-body material acceptance criteria
Identify the proposed carbonate role and the composition and impurity limits required by the actual formulation. A chemical assay does not by itself establish a firing or finished-body result, so obtain current analysis and the relevant technical and safety documents for the offered grade.
Use physical criteria without inferring a firing recipe
The 325 mesh designation needs an agreed basis and the distribution appropriate to the process, while density is 4.43 g/cm3. Confirm the applicable physical and thermal test definitions rather than treating a thermal label as an operating temperature or converting mesh into an assumed median size.
- Glass enquiry
- Define the actual material role and process acceptance tests for the proposed carbonate.
- Enamel enquiry
- Assess the offered grade against the relevant formulation, process and finished-material requirements.
- Verification request
- Obtain any required applicable SGS report and confirm its product and scope rather than relying on a verification label.
Qualify the actual carbonate grade for each role
Ferrite and electronics directions are also identified, with their own material requirements and qualification evidence. Confirm the applicable test basis for the water-insolubility description and current product-specific handling information, including the cool, dry and well-ventilated storage direction.
For this BaCO3 comparison, connect confirmed composition and powder criteria to the actual ceramic, glass or enamel assessment. The representative process results and applicable product documents should determine whether the offered carbonate meets the intended role.
