Grade A HS-801 Quartz Material, 99.5% SiO2, for Ceramic, Refractory, Glass and Filtration Enquiries
-
ColorWhite
-
ApplicationWater Treatment, Glass Manufacturing, ConstructionTypeNatural
-
Model NumberCustomizableCompositionQuartz Crystal
-
Processing ServiceOEMSize16~26mm,26~40mm,40~70mm,70~120mm
-
Product NameQuartz SandColorPure White
-
SiO2 Content (%)99.5%Grade StandardHigh Purity Quartz Sand
-
ShapeGranule
Grade A and the HS-801 designation identify the starting point for this quartz-material enquiry. The natural-designated quartz crystal material has granular form, stated SiO2 content of 99.5% and a qualitative pure-white description, with the actual offered model and fraction to be confirmed.
Keep the millimetre notation with the size request
The listed ranges are 16~26mm, 26~40mm, 40~70mm and 70~120mm. Ask which fraction is proposed and obtain its sieve report and method. These are millimetre descriptions; they should not be interpreted as mesh options or assumed to be separately selectable grades.
Confirm Grade A and the actual technical offer
Request documents linking the HS-801 designation and Grade A choice to the sample. Clarify the available size or customization scope through the actual proposal. A grade label does not establish an iron limit, and a white-colour description does not provide a measured whiteness value.
- Chemical evidence
- Obtain assay and the impurity limits relevant to the process.
- Physical evidence
- Obtain the confirmed supplied fraction and its grain report.
Qualify the quartz against the intended application
Describe the ceramic, refractory, filtration, glass, construction or water-treatment requirement and agree the appropriate acceptance criteria. Review matched technical and safety information before evaluation. No filtration efficiency or refractory service temperature is established here. Keep the grade, model, fraction and reports with the qualification result so a repeat enquiry refers to the actual material assessed.
