Cobalt-Oxide Black Powder, TY-Cobalt Oxide, for Ceramic-Pigment and Cobalt-Content Assessment
-
ColorBlackPhysical formPowder
-
CAS No.1307-96-6Purity99%
-
AppearanceBlack PowderApplicationLithium Battery Materials, Ceramic Pigments, Glass
-
ClassificationCobalt OxideEINECS No.215-154-6
-
Grade StandardIndustrial GradeMolecular FormulaCoO
-
Other NamesCobalt Monoxide / Cobalt TetroxideOxide TypeMetal Oxides
-
Molecular Weight74.93SolubilityInsoluble in Water
-
Density6.44 g/cm³MOQ1 MT
-
Packaging25kg Bag, 500kg Bag, 1000kg Jumbo BagSupply Ability500 MT per Month
-
SampleAvailableCertificateISO, COA, MSDS
A ceramic or pigment project should define the required cobalt analysis and oxide identity before accepting a powder. TY-Cobalt Oxide is an offered model of industrial black cobalt-oxide material, with samples available for a documented enquiry about the actual grade.
Define the elemental-cobalt analysis basis
Request a current measured cobalt result and the basis on which it is reported. Keep elemental-cobalt content distinct from oxide purity, because the two measurements answer different composition questions and should not be treated as an interchangeable grade guarantee.
Establish the oxide behind the composition report
Obtain actual phase identification linked to the offered model before making a phase-specific conclusion. Ask the chemical and powder reports to identify the material tested, relevant impurities and particle methods, so the project compares evidence for the actual grade rather than a general family label.
- Composition evidence
- Defined elemental-cobalt and oxide-assay bases with current results.
- Identity evidence
- Actual oxide phase linked to the offered sample and model.
Agree the ceramic or pigment qualification measurements
Describe the intended process and the output measurements that determine acceptance. A black powder and a ceramic-pigment direction do not establish a finished colour result or prove that a particular oxide grade meets the project.
Confirm sample terms, current safety documents and applicable certification scope before comparison. Glass and lithium-battery materials are also enquiry directions with separate qualification needs. Request the analysis basis and phase report in the technical brief so the actual material decision rests on defined evidence and relevant process results.
