Industrial Barium Carbonate BaCO3 White Powder for Ceramic Industry, 99.0% Purity and 325 Mesh
-
Particle-size designationMesh designationColorWhite
-
Physical formPowder
-
CAS No.513-77-9Purity99.0%
-
AppearanceWhite PowderApplicationCeramics, Glass, Ferrite, Electronic Industry, Ceramics, Glass, Ferrite, Electronic Industry, Enamel
-
ClassificationCarbonateEINECS No.208-167-3
-
Grade StandardIndustrial GradeMolecular FormulaBaCO3
-
Other NamesCarbonic Acid Barium SaltTypeBarium Carbonate
-
Product NameBarium CarbonateDensity4.43 g/cm³
-
Melting Point811°C (Decomposes)SolubilityInsoluble in Water
-
Particle Size325 MeshStorageCool, Dry and Well-Ventilated Place
-
Shelf Life24 MonthsPackaging25kg PP Woven Bag / 1000kg Jumbo Bag
-
SampleAvailable
An iron-sensitive ceramic enquiry needs a measured constituent limit rather than a broad material description. This industrial white barium carbonate powder is identified as BaCO3, with stated purity of 99.0%. Its particle designation is 325 mesh and stated density is 4.43 g/cm³.
Put the ceramic iron requirement into the enquiry
Specify the maximum iron result acceptable for the intended formulation and request current analysis using the relevant method. Review the other constituents that matter to the project. A low-iron description does not establish a numerical limit or predict the colour of the finished ceramic.
Review the sieve evidence for the powder being tested
Confirm the sieve standard, preparation procedure and passing criterion behind the 325-mesh designation. Request a complete particle distribution if the project needs finer detail. Compare the stated density using an explicitly defined measurement basis.
Check the actual ceramic process with appropriate reports
Describe the intended formulation and process conditions before choosing acceptance tests. Obtain thermal analysis relevant to the supplied material and clarify the event being measured. A general temperature entry should not be used as a qualified operating instruction.
What would justify selecting this sample?
Use the current constituent analysis, sieve and physical-property reports alongside the controlled ceramic trial. Keep those documents associated with the exact powder evaluated. Glass, ferrite, electronic-industry and enamel uses require their own evidence and finished-material criteria. Review compound-specific technical documentation and the supplied storage instructions before final acceptance.
