Industrial Basic Nickel Carbonate Green Powder, Ni 45–48%, for Nickel-Compound Production Assessment
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
A nickel-compound production enquiry should name the material requirements and the evidence needed to compare offered lots. This industrial basic nickel carbonate is a light-green powder with stated nickel content of 45–48%, providing a composition reference for a defined technical assessment.
Define the downstream material acceptance brief
Describe the actual nickel-compound project and specify the required chemical and powder limits. Request current composition and the basis of the nickel analysis, because a content range alone does not establish compound purity or the requirements of every downstream process.
Ask for comparable evidence behind a consistency requirement
If lot consistency matters to the project, request reports using comparable methods and clearly defined acceptance limits. Stable-quality wording does not itself demonstrate repeated results, so the assessment should identify which actual properties and records will support the purchasing decision.
- Grade evidence
- Nickel-analysis basis, required impurities and measured powder properties.
- Consistency evidence
- Comparable lot reports evaluated against the project’s accepted limits.
Confirm physical methods and the actual process trial
The stated approximate density is 3.5–4.0g/cm³ and product pH is 7.0–9.0, with methods to confirm. Obtain the pH concentration and current safety documents, and qualify the material in the intended process rather than treating those values as operating instructions.
The powder is described as water-insoluble and samples are available, with terms and current storage and shelf-life conditions to agree. Battery and catalyst enquiries need their own qualification. Include the actual production brief and requested lot reports so the comparison addresses a concrete material decision without an assumed consistency or performance guarantee.
