Industrial Basic Nickel Carbonate Powder, Nickel 45% Minimum, for Battery-Material Grade Assessment
-
ColorLight greenPhysical formPowder
-
CAS No.12607-70-4Purity45%
-
AppearanceLight Green PowderApplicationBattery Materials, Catalysts, Electroplating Chemi
-
ClassificationCarbonateEINECS No.235-715-9
-
Grade StandardIndustrial GradeMolecular FormulaNiCO3*2Ni(OH)2*4H2O
-
Other NamesBasic Nickel Carbonate; Nickel Carbonate Basic; NiTypeNickel Carbonate
-
Product NameBasic Nickel CarbonateNickel Content45%-48%
-
DensityApprox. 3.5-4.0 g/cm³Water SolubilityInsoluble in Water
-
pH Value7.0-9.0Packing25kg PP Bag with PE Liner; 500kg/1000kg Jumbo Bag
-
HS Code2836999000Shelf Life24 Months
-
StorageStore in a Cool, Dry and Well-Ventilated PlaceSampleAvailiable
A battery-material enquiry should define the nickel-analysis requirement and actual grade evidence before a powder is accepted. This industrial basic nickel carbonate is a light-green powder with declared nickel content of 45% minimum for a documented material comparison.
Verify the nickel minimum on the actual analysis basis
Request current composition and the basis used to report nickel content for the offered grade. A nickel minimum is a chemical-analysis requirement, while compound purity, individual impurities and relevant powder measurements need their own clearly defined evidence.
Set the battery-material acceptance brief
Describe the intended process and the measurements that determine material acceptance. A battery-material direction does not establish capacity, electrochemical performance or an approved grade, so qualification should use actual reports and relevant process results.
- Chemical requirements
- Actual composition, nickel-analysis basis and required impurity limits.
- Process requirements
- The intended battery-material trial and accepted measurements.
Check physical methods and certification scope
The stated approximate density is 3.5–4.0g/cm³ and product pH is 7.0–9.0, with methods to confirm. Request the pH concentration and applicable ISO documents with scope, rather than treating those descriptors as process settings or evidence of battery performance.
The powder is described as insoluble in water, and samples are available with terms and current storage and shelf-life conditions to confirm. Include the actual grade brief and requested analysis in the enquiry so the sample comparison addresses the project’s requirements without an assumed hydrate identity, purity guarantee or finished-process result.
