XM-PB06 Blanc Fixe Barium Sulphate White Powder for Plastics, 98.5% Minimum Purity
-
ColorWhitePhysical formPowder
-
CAS No.7727-43-7Purity98.5% Min
-
AppearanceWhite PowderApplicationPlastic industry
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4Other NamesBlanc Fixe
-
TypeBarium SulfateModel NumberXM-PB06
-
Package25kg/bagColorPure White
-
MOQ24MTApperanceWhite Powder
-
Molecular formulaBaSO4 Barium Sulphate
XM-PB06 is an industrial barium sulphate white powder for the plastic industry, with a minimum purity of 98.5% and the blanc fixe alias. A useful enquiry should connect that composition requirement to the actual resin and the powder criteria needed for the proposed process.
Identify the sulfate grade for the plastic project
The BaSO4 formula, CAS 7727-43-7 and XM-PB06 model identify the material being considered. Confirm the actual material route and complete specification rather than assuming that barite and blanc fixe wording makes every sulfate powder interchangeable for the intended plastic formulation.
Use minimum assay without inferring performance
The 98.5% minimum purity is a chemical acceptance criterion for XM-PB06. It does not establish particle size, dispersion or a finished-plastic result, and the pure-white appearance should be assessed through an appropriate colour or whiteness method where the resin project needs one.
- Resin and process brief
- Identify the plastic grade and the actual processing route for the XM-PB06 trial.
- Powder specification
- Request measured distribution, relevant treatment information and the physical criteria needed for that process.
- Supporting documents
- Obtain current composition, impurity limits and product-specific safety information for the offered material.
Test the proposed material in the intended resin
A representative plastic formulation should establish whether XM-PB06 meets the project's processing and finished-article requirements. No fineness or compatibility value is implied by the model code, and an economical-material label does not prove an equivalent result or a practical advantage in every resin.
For this XM-PB06 enquiry, use the minimum 98.5% assay and confirmed grade identity as the starting point, then let a defined powder specification and resin trial establish the actual material decision.
