-
ColorWhitePhysical formPowder
-
CAS No.7727-43-7Purity98%-99%
-
AppearanceWhite PowderApplicationPlastic,Rubber,Coating,Sealants
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4Other NamesPrecipitated Barium Sulphate
-
TypeBarium SulfateModel NumberXM-PB06
-
D50(μm)0.5-0.7D97(μm)1.8-2.5
-
Whiteness98-99%pH7-8
-
Oil Absorption(G/100g)13-15Package25kg/Bag
-
CertificationISO9001Hs code28332700
-
Package AppearancecustomizedSampleFreely
The mineral powder and the finished coating answer different selection questions. XM-PB06 industrial precipitated barium sulphate is a white BaSO4 powder with 98–99% stated purity, offered as a candidate for powder-coating formulation assessment.
Match the XM-PB06 mineral to the coating brief
Identify the binder and the finished-film criteria that matter to the project. Confirm the offered XM-PB06 specification and the sample to be evaluated before planning the coating trial. A mineral name does not establish a perfect surface, gloss or durability result.
Compare the fine-particle measurements on a common basis
The stated D50 is 0.5–0.7 μm and D97 is 1.8–2.5 μm for XM-PB06. Obtain the relevant measurement methods and compare each with the required mineral limits. The particle profile is useful screening evidence without replacing the finished-coating test.
Set the colour and finish tests before selection
XM-PB06 has stated whiteness of 98–99% and pH of 7–8. Confirm the whiteness method and assess how the actual coating meets its appearance target. Powder whiteness and a final film result should remain distinct parts of the technical comparison.
Request the complete XM-PB06 grade methods, including the oil-absorption test basis, and bring them into the binder-specific trial brief. Plastics, rubber and sealants are also stated directions, but they require separate application evidence. For this powder-coating enquiry, a matched mineral sample and an agreed finished-film acceptance test provide the next useful decision.
