XM-T60 BaSO4 Filler Masterbatch with LDPE/LLDPE Carrier for PP, PE, Film Blowing and Injection Moulding Evaluation
-
ColorTransparentPhysical formMasterbatch , Granular
-
CAS No.7757-82-6Purity80%
-
Appearancetransparent granuleApplicationplastic, Film Blowing
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4TypeBarium Sulfate
-
Model NumberXM-T60Hs code28331900
-
CertificationISO9001Usage10%-50%
-
Packing25KG/BagApplication 1Injection Molding
-
CarrierLDPE+ LLDPEFeatureHigh Transparent
-
MFI8-12g/10minSampleAvailiable
For a PP or PE filler-masterbatch enquiry, XM-T60 provides a specific model and an LDPE/LLDPE carrier to discuss. The industrial material is supplied as transparent granules and is identified for film blowing and injection moulding, with the intended base resin requiring its own qualification.
Check the carrier against the target resin
The LDPE/LLDPE carrier is a defined part of the XM-T60 identity, while PP and PE are the target-plastic context in its product name. Confirm how the offered masterbatch is to be evaluated in the selected resin instead of assuming that one carrier establishes equal compatibility with every polypropylene or polyethylene formulation.
Specify the mineral and flow evidence
Ask for the complete XM-T60 composition and product-specific chemical identity before approving it as a particular sulfate-filled formulation. A meaningful melt-flow comparison needs the test temperature and load as well as the value, and a broad purity percentage should not be read as a guaranteed mineral-loading fraction without its basis.
- Identify the PP or PE resin and the film-blowing or moulding process proposed for XM-T60.
- Request composition, safety documentation and defined melt-flow test conditions.
- Agree trial addition levels and final-article acceptance criteria through the actual qualification process.
Judge transparency on the final film or part
XM-T60 has a transparent-granule appearance, but optical performance in a finished article depends on the actual formulation and geometry. Measure the required transmission, haze or appearance criteria in a representative trial rather than treating a transparency label as a finished-plastic guarantee.
Use XM-T60 as a carrier-specific masterbatch candidate, with the PP or PE project defined clearly enough for composition review and a meaningful process trial.
