XM-T80-4 Transparent Filler Masterbatch with LDPE/LLDPE Carrier for Film Blowing and Injection Moulding
-
ColorTransparentPhysical formMasterbatch , Granular
-
CAS No.7757-82-6Purity80%
-
Appearancetransparent granuleApplicationplastic, Film Blowing
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4TypeBarium Sulfate
-
Model NumberXM-T80-4Hs code28331900
-
CertificationISO9001Usage10%-50%
-
Packing25KG/BagApplication 1Injection Molding
-
CarrierLDPE+ LLDPEFeatureHigh Transparent
-
MFI8-12g/10minSampleAvailiable
XM-T80-4 identifies an industrial filler masterbatch supplied as transparent granules with an LDPE/LLDPE carrier. Film blowing and injection moulding are the intended process directions, so a technical comparison should begin with the selected resin and the acceptance criteria for the finished article.
Identify the actual XM-T80-4 formulation
Ask for a product-specific composition and chemical-identity specification for XM-T80-4 rather than selecting by a broad quality or value claim. The model code distinguishes the enquiry, but it does not itself define mineral loading, impurity limits or a performance difference from another filler masterbatch.
Link carrier choice to process evidence
The LDPE/LLDPE carrier provides a concrete detail for reviewing XM-T80-4 against the intended base resin. Confirm the melt-flow test temperature and load, then assess the proposed material through a representative film-blowing or injection-moulding trial instead of treating a flow value as universal processing approval.
- State the resin and article type for the XM-T80-4 trial.
- Request complete composition, applicable safety documentation and defined flow-test conditions.
- Agree the trial addition level and the tests that will decide processing and optical acceptance.
Assess transparency at article level
Transparent granules describe the supplied XM-T80-4 appearance, not a measured transmission or haze result after compounding. Define the optical criteria for the actual film thickness or moulded geometry, and verify them on the finished article before treating the material as qualified for that use.
For XM-T80-4, a clear carrier/resin match, confirmed composition and a defined process trial provide a useful basis for judging the masterbatch against the project's own requirements.
