Aluminum Sulfate Industrial White Granules, Al2O3 16% Minimum for Papermaking and Mordant Enquiries
-
ColorWhitePhysical formGranular
-
CAS No.10043-01-3Purity16%min Al2O3
-
Appearancewhite granuleApplicationpapermaking,mordant
-
ClassificationSulphateEINECS No.233-135-0
-
Grade StandardIndustrial GradeMolecular FormulaAl2O12S3
-
Other NamessulfuricacidTypeAluminum Sulfate
-
Product nameAluminum SulfateCAS10043-01-3
-
Melting point770 °CBoiling point759.71°C
-
Density2.71 g/mL at 25 °C (lit.)Vapor pressure0-0.001Pa at 20-25℃
-
Usagepapermaking,mordantGradeIndustral Grade
-
Package25kg/bagColorWhite Color
Aluminum sulfate grade enquiries should use the stated Al2O3 criterion on its actual analytical basis. This industrial offer is white granular material with Al2O12S3 formula and a 16% minimum Al2O3-content designation.
Verify the aluminum-oxide content criterion
Request current analysis, the Al2O3 method and relevant impurity limits for the actual offered salt form. The minimum oxide content is not compound purity or a process dose, so keep its basis explicit when comparing material specifications.
- Granule criterion
- Define physical characteristics and relevant acceptance measurements.
- Papermaking criterion
- Identify the actual ingredient role and representative process tests.
- Mordant criterion
- Agree the material function and results required for acceptance.
Confirm physical descriptions for the offered sulfate form
Match current technical and safety records to the specific aluminum sulfate identity and chemical identifiers. Clarify the thermal-event definitions and applicable density and vapor-pressure methods before using those descriptors as material criteria or interpreting them as operating settings.
Evaluate the actual papermaking or mordant requirement
Application directions and quality-assurance wording do not establish measured grade consistency or finished-process performance. Use representative results against the actual formulation or process criteria, with the proposed material role defined before approval.
Obtain any required current grade records and keep each application tied to its own acceptance evidence. Select the offered granules using confirmed oxide analysis, relevant chemical and physical criteria and actual process results; a category label alone does not establish potable-water qualification or treatment performance.
