Industrial Barium Carbonate BaCO3 Fine Powder, 99.0% Purity and 325 Mesh, for Enamel and Glass Production
-
Particle-size designationMesh designationColorWhite
-
Physical formPowder
-
CAS No.513-77-9Purity99.0%
-
AppearanceWhite PowderApplicationCeramics, Glass, Ferrite, Electronic Industry, Ceramics, Glass, Ferrite, Electronic Industry, Enamel
-
ClassificationCarbonateEINECS No.208-167-3
-
Grade StandardIndustrial GradeMolecular FormulaBaCO3
-
Other NamesCarbonic Acid Barium SaltTypeBarium Carbonate
-
Product NameBarium CarbonateDensity4.43 g/cm³
-
Melting Point811°C (Decomposes)SolubilityInsoluble in Water
-
Particle Size325 MeshStorageCool, Dry and Well-Ventilated Place
-
Shelf Life24 MonthsPackaging25kg PP Woven Bag / 1000kg Jumbo Bag
-
SampleAvailable
Enamel and glass projects need a carbonate grade that can be compared against an actual raw-material acceptance brief. This industrial white BaCO3 powder is described with 99.0% purity, 325 mesh and density of 4.43g/cm³, providing a starting point for that comparison.
Describe the enamel acceptance measurements
Identify the chemical impurities and finished-enamel measurements relevant to the project. Request current analysis for the offered powder, because a chemical assay alone does not establish the appearance or behaviour of a fired enamel system.
Match glass requirements with powder evidence
Ask which mesh standard defines the 325-mesh designation and obtain a measured particle distribution. Pair the chemical and particle reports with a clearly defined thermal assessment, so a material descriptor is not substituted for the actual glass-process qualification.
Which quality documents should accompany the enquiry?
If ISO documentation is required, request the applicable certificate and its scope. Establish what the document covers before treating it as evidence for a particular product or a finished-material result.
Agree the sample comparison and retention conditions
Samples are available for a defined evaluation, with terms and accompanying technical documents to be confirmed. Obtain current storage and shelf-life conditions and agree the acceptance measurements before the trial begins.
Water insolubility is part of the stated powder profile, while enamel, glass, ceramic, ferrite and electronic-material enquiries still need their own qualification criteria. A brief that names the required impurity limits, particle method and process measurements will make the technical exchange more useful.
