-
ColorWhitePhysical formPowder
-
Product nameTalc PowderCertificateISO
-
Whiteness (%)95SiO2 (%)60
-
Moisture (%)≤0.5Oil Absorption g/100g20-35
-
PH Value8.5-10GradeIndustrial Grade
-
ColorWhite Powder
An industrial talc enquiry should connect a specific process with the required mineral evidence. This white talc powder has stated whiteness of 95% and SiO2 content of 60%. Its technical parameters also give moisture of 0.5% maximum and pH of 8.5–10.
Define the application before judging the talc
Identify the intended process and the material properties that will determine acceptance. Request a complete particle distribution with units and its measurement method. Industrial grade is a material classification, while suitability for a particular application must follow the relevant specification and sample evaluation.
Review the composition without changing its meaning
The stated 60% SiO2 figure is a composition parameter. It should not be interpreted as a whole-talc purity or as a measurement of free crystalline silica. Ask for current mineral analysis and the specific impurity information required by the project's procurement criteria.
Request the evidence behind an asbestos-free requirement
If absence of asbestos is an acceptance requirement, obtain an applicable report for the material being considered. Review the analytical method, scope and result with the relevant technical specialist. A descriptive claim or a general certificate label does not supply that sample-specific evidence.
Complete the powder comparison
Confirm the test methods for whiteness, pH, moisture and oil absorption before comparing candidates. Keep those reports associated with the actual talc sample. The process team can then assess the powder against its own acceptance criteria and request any additional documentation before final material selection.
