Industrial PAC Polyaluminium Chloride Powder for Effluent and Sewage-Treatment Trials
-
ColorYellowPhysical formPowder
-
CAS No.1327-41-9Purity28%-30%
-
pH Value3.5-5.0Adsorbent VarietyOther
-
EINECS No.215-477-2Molecular Formula[Al2(OH)nCl6-n]m
-
StatePowderWater Treatment ScenarioWastewater Treatment
-
Product TypeFlocculant / CoagulantDosage5-30 mg/L
-
Effective Concentration (%)28%-30%Ionic TypeCATIONIC
-
Product NamePolyaluminium Chloride (PAC)TypeWater Treatment Chemical
-
AppearanceYellow Powder, Light Yellow PowderActive Ingredient ContentAl2O3 28% / 30%
-
Grade StandardIndustrial Grade Drinking Water GradeBasicityAl2O3 ≥28% / ≥30%
-
ApplicationWater Treatment,Wastewater Treatment,Drinking Water PurificationPacking25kg Bag / 1000kg Jumbo Bag
-
SampleAvailableStorageStore in Cool, Dry and Well-Ventilated Place
An effluent enquiry becomes more useful when it describes the discharge stream and the result the treatment must achieve. This industrial PAC, or polyaluminium chloride, is a cationic yellow or light yellow powder identified as a flocculant/coagulant. Effluent and sewage treatment are the stated evaluation contexts.
Describe the effluent before choosing trial conditions
Provide the actual water characteristics and the acceptance targets for the project. Have the appropriate technical team assess the powder using that stream. A general coagulant description does not establish a universal dose or guarantee the required treatment outcome.
Request current composition and basicity together
Reported effective concentration is 28–30%, with Al2O3 content designations of 28% / 30%. Confirm the exact grade and the analysis associated with the sample. Basicity needs its own correctly defined measured result, rather than an assumption based on alumina content.
Use material pH only with its preparation method
The reported material pH is 3.5–5.0. Obtain the sample preparation and measurement procedure before comparing it with another powder. That material result does not define the operating range of the sewage or industrial effluent.
Decide from sample-linked evidence
Review the controlled treatment results with the current alumina, basicity and pH reports. Keep the documentation associated with the exact PAC material tested. Potable-water use, if requested, requires applicable grade and approval evidence separately. Confirm the supplied storage instructions and resolve the actual grade before making the final selection for the project.
