-
Particle-size designationD50 specifiedColorWhite
-
Physical formPowder
-
CAS No.7727-43-7Purity98%-99%
-
AppearanceWhite PowderApplicationPlastic,Rubber,Coating,Sealants
-
ClassificationSulphateGrade StandardIndustrial Grade
-
Molecular FormulaBaSO4Other NamesPrecipitated Barium Sulphate
-
TypeBarium SulfateModel NumberXM-PB06
-
D50(μm)0.5-0.7D97(μm)1.8-2.5
-
Whiteness98-99%pH7-8
-
Oil Absorption(G/100g)13-15Package25kg/Bag
-
CertificationISO9001Hs code28332700
-
Package AppearancecustomizedSampleFreely
For a paint-flow investigation, XM-PB06 offers a defined precipitated barium sulphate grade to test rather than a verified flow improvement. The industrial white powder has a 98–99% purity range, with D50 of 0.5–0.7 microns and D97 of 1.8–2.5 microns for material specification work.
Treat paint flow as a measured outcome
The role of XM-PB06 in a flow-sensitive paint needs evaluation in the actual binder and processing route. Define the relevant rheology or application test and acceptance criteria before judging a change; the precipitated-sulfate name and fineness ranges do not themselves establish a viscosity or levelling result.
Build the raw-material comparison from separate criteria
For this XM-PB06 powder, 98–99% whiteness is distinct from 98–99% assay, while D50 and D97 describe different points in its size distribution. Agree the optical, composition and distribution methods so that the material comparison uses equivalent tests rather than matching similar-looking numbers.
- Identify the paint binder and the flow test proposed for XM-PB06.
- Request current analysis and a particle-distribution report for the offered grade.
- Compare a representative formulation trial against the agreed application and appearance criteria.
Qualify the industrial grade for the selected matrix
Coatings, plastics, rubber and sealants are the explicit XM-PB06 application directions, and each requires its own trial conditions. Confirm the pH test behind the 7–8 range and obtain product-specific safety documentation, with an applicable current document for any certification requirement.
An XM-PB06 flow enquiry should link the actual paint test to its assay, colour and particle criteria, letting the representative coating trial determine whether this grade meets the desired processing result.
