Technical Guides

Relia Chemical 0

Relia · Manufacturing in China

Potassium Hydroxide Selection for Liquid Soap Formulations

If you formulate liquid or potassium soap, compare potassium hydroxide on the effective-KOH basis your formula uses.

Relia's listed flakes can be reviewed for assay, carbonate, moisture and physical form.

Discuss this application Explore grade candidates

Define the requirement→Compare the grade→Review a trial

Form: Proposed KOH flakes
Effective basis: KOH assay and method
Product: Your soap acceptance requirements

White potassium hydroxide flakes with industrial formulation samples

01 / 11

Relia · factory and material support

Manufacturing Support for This Purchase

Relia manufactures potassium hydroxide materials in China through its own factories.

We can review your caustic-potash enquiry with the accepted KOH specification and formulation requirements. Give us the critical limits for carbonate, other impurities and supplied form. The proposal should retain the actual assay basis; your soap formulation remains the place to qualify the material's practical fit.

Form

Proposed KOH flakes

Effective basis

KOH assay and method

Impurities

Carbonate and relevant limits

Product

Your soap acceptance requirements

ONE APPLICATION · FOUR CONNECTED CHECKS

Use the same requirement and reporting basis for each candidate.

02 / 11

Material focus

The Soap Raw Material

The potassium-hydroxide title identifies 90% minimum white flakes, while a catalogue field also contains a 95% option. We resolve which grade is actually being offered before quotation. Assay, carbonate, moisture and other relevant limits then belong to that specific flake proposal.

Your systemForm

Proposed KOH flakes

Material focusEffective basis

KOH assay and method

AcceptanceProduct

Your soap acceptance requirements

Connect the material choice with your process and the result you need.

Close view of white potassium hydroxide flakes

03 / 11

Grade comparison

A Single Offered KOH Grade with a Clear Assay

Grade information and how to use it
Review area	Listed data and acceptance basis	Use in your selection
KOH entry · 6249	The title states 90% minimum. Do not silently upgrade it because the general purity field also mentions 95% minimum.	Keep chemical identity, assay basis and the actual offered grade in the same specification.
Physical form	The supplied form is described as white flakes. Confirm the offered condition and relevant packing specification.	Use the same quantity, packaging and destination when comparing supply proposals.
Analytical basis	Request actual KOH assay and the relevant carbonate, moisture and impurity limits for your process.	Connect the limit with storage, handling and your processing conditions.
Supply comparison	Compare quotations at the stated grade, net quantity, packaging, destination and agreed analytical basis.	Use the same quantity, packaging and destination when comparing supply proposals.

Listed figures describe catalogue entries. Agree the actual offered specification and measurement basis.

04 / 11

Actual catalogue references

Explore the Related Material Grades

Use these listed candidates to start a grade-specific discussion with us.

Material candidate

Potassium hydroxide flakes, ≥90% KOH

Use the offered active assay for formulation and dosing calculations, together with your relevant impurity limits.

View grade details Discuss this grade

Candidate entries are a starting point; the agreed specification and relevant evaluation support approval.

Your trial and acceptance

The Formulation Review

Your responsible formulation or process team should evaluate the defined offered grade under its relevant procedure. Keep the actual assay and impurity limits with the result. We do not provide a use concentration or assume that a different KOH grade can be substituted without review.

Industrial formulation samples and the material sample

06 / 11

TRIAL CHECK 01

Potassium names

Do not establish direct substitution.

TRIAL CHECK 02

Form changes

Need a common comparison basis.

TRIAL CHECK 03

Industrial assay

Does not prove every special qualification.

Use your current material as the reference and agree the acceptance limits before evaluation.

Manufacturing and grade controls

Electrolysis, Concentration and Flake Finishing

Industrial caustic potash is produced through potassium-chloride electrolysis and then concentrated or finished into the required form. Later exposure and handling can change the condition supplied to your process. Connect the offered KOH, carbonate and moisture data with the actual flake specification and sealed packing, rather than treating every white alkaline solid as equivalent.

Prepare potassium chemistry
A potassium-chloride solution is used in the industrial electrolysis route for caustic potash.
Produce the hydroxide
Electrolysis creates KOH solution, with the actual production technology identified by its source.
Concentrate and finish
The required solution or solid form has its own concentration and finishing specification.
Retain the condition
The supplied flakes need a defined KOH, carbonate and moisture basis through packing and storage.

Assay: State the effective-KOH requirement rather than compare product weight alone.
Impurities: Keep carbonate and other relevant limits with their methods.
Use: Qualify the actual proposed material in the intended soap or industrial formulation.

Keep the proposed grade's production route and measured acceptance limits together in the material specification.

07 / 11

From sample to supply

A Matched Commercial Proposal

Compare actual price and packing terms on the same supplied-form and effective basis. We connect the proposed batch documents to the grade. Changes in carbonate, form or moisture can then be reviewed clearly.

White potassium hydroxide flakes with plain sample packaging

08 / 11

01 · Grade dataA defined materialKeep the grade name, figures and measurement basis together.02 · Application evidenceA relevant evaluationCompare the candidate with your current material and acceptance limits.03 · Purchase briefAn agreed order scopeCarry the accepted material, packaging and destination into the enquiry.

Grade information → application evaluation → purchase specification.

Connected guidance

Connect the Next Purchasing Step

REFINE YOUR SELECTION

Sodium Metasilicate Pentahydrate for Industrial Cleaners

If you formulate an industrial cleaner with sodium metasilicate pentahydrate, retain the five-water identity throughout the purchase comparison.

CHECK THE EVIDENCE

Sorbitan Monooleate for Industrial Emulsion Trials

If you need sorbitan monooleate for an industrial emulsion, start with the oil phase and stability target of the formulation.

PREPARE THE NEXT STEP

1000 L IBC Configuration Selection for Chemical Liquids

If you buy a 1000 L IBC for a chemical liquid, choose the complete tank, valve, seal and pallet configuration for that liquid.

Continue with the route relevant to your project.

09 / 11

Work with us

Start with Your Material Brief

Send us the details below to review a concrete grade proposal and the next evaluation step.

Application and process: Form: Proposed KOH flakes
Material and grade: Your current grade or one of the relevant product links above.
Important requirements: Effective basis: KOH assay and method; Product: Your soap acceptance requirements
Purchase scope: Trial or order quantity, preferred package and destination.

Share the details you already have; we can clarify the remaining grade and order requirements together.

Discuss a Potassium-Soap KOH Requirement Email the material brief

Read the SDS, TDS and COA guide · Explore all buying guides

Qingdao Relia Industries Co., Ltd. · China manufacturing of industrial minerals, chemicals and the listed packaging products.

10 / 11

Contact the factory team

Speak with Our Materials Team

Qingdao Relia Industries Co., Ltd.

Tell Relia the material, application, required grade, quantity and destination. Include the product link or the key limits you already use, so the next conversation starts with a concrete proposal.